Cisco 350-501 SPCOR Dumps includes dumps pdf and dumps vce: https://www.leads4pass.com/350-501.html (PDF+VCE). lead4pass has a complete Cisco 350-501 SPCOR Dumps to help you successfully pass the exam.
All exam content on this website is provided by Lead4Pass. Lead4Pass updates all exam questions and answers throughout the year. We will share free dumps for each update. Today we share the latest updated Cisco 350-501 free dumps. You can take the exam online. The answers to the exam are announced at the end of the article.
And we will also share all collections of Cisco 350-501 exam PDF
Google Drive:
[Free-1] https://drive.google.com/file/d/13EJelTjvt7GfbHqACOshSk__reaYxOe8/view?usp=sharing
[Free-2] https://drive.google.com/file/d/16Yq3vPpzXGqd8Fg-rz9VO2sLc0qoigSq/view?usp=sharing
[Free-3 Today] https://drive.google.com/file/d/1F1LEnTrCqIKX-y_iXdXRISQDOj-vAaZf/view?usp=sharing
Cisco CCNP 350-501 SPCOR exam practice
QUESTION 1
Which configuration modifies Local Packet Transport Services hardware policies?
A. Option A
B. Option B
C. Option C
D. Option D
Reference: https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/addr_serv/command/reference/b_ipaddr_cr41crs/b_ipaddr_cr41crs_chapter_0111.html#wp1754734006
QUESTION 2
Refer to the exhibit Which effect of this configuration is true?
A. R1 can support a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.
B. R1can support a graceful restart operation on the peer, even if graceful restart is disabled on the peer.
C. R1 can failover to any peer.
D. R1 can failover only to a peer that is configured for LDF SSO/NSF.
Reference: https://www.cisco.com/en/US/docs/general/Test/kwoodwar/fsgr29s.html
QUESTION 3
Which BGP attribute is used first when determining the best path?
A. origin
B. AS path
C. local preference
D. weight
QUESTION 4
Which statement about Network Services Orchestrator (NSO) is true?
A. It must use SDN as an overlay for addressing.
B. It uses YANG modeling language to automate devices.
C. It is used only in service provider environments.
D. It can be used only with XML coding.
QUESTION 5
You are configuring MPLS traffic-engineering tunnels in the core. Which two ways exist for the tunnel path across the core? (Choose two.)
A. The dynamic path option is supported only with IS-IS.
B. Tunnels can be configured with dynamic path or explicitly defined path.
C. A zero bandwidth tunnel is not a valid option.
D. The bandwidth statement creates a “hard” reservation on the link.
E. Tunnel links inherit IGP metrics by default unless overridden.
QUESTION 6
When configuring traffic engineering tunnels in Cisco MPLS core network, you see the traffic is not taking the expected path in the core.
Which command do you use to quickly check path of a TE tunnel?
A. Traceroute mpls ipv4 -tunnel destination
B. Ping
C. show mpls traffic-engineering tunnels
D. traceroute
QUESTION 7
An engineer is trying to implement BGP in a multihomed architecture. What must the engineer configure to influence inbound path selection?
A. A route map with WEIGHT attribute to control the inbound traffic.
B. An offset list to set the metric for routes received from neighboring autonomous systems.
C. An access list to identify traffic and enable it on both of the provider-facing interfaces.
D. A route map with AS_PATH attribute to control the inbound traffic.
QUESTION 8
Refer to the exhibit.
R101 is peering with R102 and R103, and R201 is peering with R202 and R203 using iBGP Labeled Unicast address families. The OSPF area 0 border routers are in a full iBGP Labeled Unicast mesh, and VPNv4 routes are exchanged directly between PE routers R101 and R201 through iBGP.
Which address family-level configuration must be applied on ABR R102 on ABR R102 to support a Unified MPLS
routing architecture with partitioned IGP domains?
A. Option A
B. Option B
C. Option C
D. Option D
QUESTION 9
A network engineer is implementing BFD configuration changes on a customer\\’s equipment. How is the bfd interval configuration on the interface disconnected?
A. The status of the interface changes.
B. The IPv4 or IPv6 address configuration on the interface changes.
C. It is automatically disconnected when the BFD-configured subinterface is removed.
D. It is automatically disconnected when the BFD main interface is removed.
QUESTION 10
A service provider has a requirement to deliver WAN gateway functionality to multi- tenant, provider-hosted clouds.
Which cisco platform meets this requirement?
A. Cisco ASR 9000 series
B. Cisco NX-OS
C. Cisco ASR 1000 Series
D. Cisco CSR 1000v
E. Cisco CRS series
QUESTION 11
A customer of an ISP requests support to setup a BGP routing policy. Which BGP attribute should be configured to choose specific BGP speakers as preferred points for the customer AS?
A. lowest multi-exit discriminator
B. highest local preference outbound
C. lowest local preference inbound
D. highest local preference inbound
QUESTION 12
DRAG DROP
Drag and drop the OSs from the left onto the correct descriptions on the right.
Select and Place:
Correct Answer:
QUESTION 13
DRAG DROP
Drag and drop the technologies from the left onto the correct definitions on the right.
Select and Place:
Correct Answer:
QUESTION 14
Refer to the exhibit.
What is the effect of this configuration?
A. R1 supports a graceful restart operation on the peer, even if graceful restart is disabled on the peer.
B. R1 supports a peer that is configured for LDP SSO/NSF as the peer recovers from an outage.
C. R1 failovers only to a peer that is configured for LDP SSO/NSF.
D. R1 failovers to any peer.
QUESTION 15
Refer to the exhibit. Which command is used to complete this configuration for QoS class-based marking?
A. PE-A(config-pmap-c)#set dscp ef
B. PE-A(config-pmap-c)#priority
C. PE-A(config-pmap-c)#random-detect
D. PE-A(config-pmap-c)#fair-queue
Announce the answer:
| Q1 | Q2 | Q3 | Q4 | Q5 | Q6 | Q7 | Q8 | Q9 | Q10 | Q11 | Q12 | Q13 | Q14 | Q15 |
| C | A | D | B | BE | A | D | B | D | D | B | IMAGE | IMAGE | C | A |
Complete Cisco 350-501 SPCOR dumps: https://www.leads4pass.com/350-501.html (Total Questions: 250 Q&A)
Download the Cisco CCNP 350-501 exam PDF collection for free
Google Drive:
[Free-1] https://drive.google.com/file/d/13EJelTjvt7GfbHqACOshSk__reaYxOe8/view?usp=sharing
[Free-2] https://drive.google.com/file/d/16Yq3vPpzXGqd8Fg-rz9VO2sLc0qoigSq/view?usp=sharing
[Free-3 Today] https://drive.google.com/file/d/1F1LEnTrCqIKX-y_iXdXRISQDOj-vAaZf/view?usp=sharing
This site collects the latest updated Cisco 350-501 SPCOR Dumps for you and the Cisco 350-501 exam PDFs from different periods. Everything is to help you take the exam.
Finally, I wish you good luck always! Like, please bookmark and share! thanks.
PS. Cisco includes many series: CCNA, CCNP, CCDP, etc., all free exam questions and answers can be obtained in Vcecert.com